Mixed Bed DM Plant

Our mixed-bed demineralizers are used where water of extremely high purity is needed. They have cation and Anion exchanger resins mixed in a single column. This achieves higher purity standards, more neutral pH and greater silica and CO2 removal control than can be done with a Two- bed system.

Mixed Bed Units are an advanced water treatment method that uses both cation and anion resins to clean water. They are typically used as the last step in the process when very pure water is needed.

Model Flow Rate Capacity Between Regeneration
(Based on TDS- 100 ppm)
D-4 75 Lit/hr. 700 Liters
D-5 250 Lit/hr. 1500 Liters
D-6 600 Lit/hr. 3500 Liters
D-8 1000 Lit/hr. 4500 Liters
D-10 1500 Lit/hr. 6000 Liters
Mixed Bed DM Plant

Quality of Treated Water from Mixed- Bed

  • pH – 6.5 to 7.0
  • Conductivity – Less than 1µS/cm
  • TDS – Less than 1 ppm
  • Silica – Less than 0.02 ppm.
Mixed Bed Water DM Plant
Model Flow Rate Regenerant
30% HCL
Regenerant
Caustic Soda
Output per Regeneration
(at 100 ppm as TDS)
K-3 30 Lit/hr. 1 Lit 0.25 Kg 500 Liters
K-4 75 Lit/hr. 2 Lit 0.50 Kg 1500 Liters
K-5 150 Lit/hr. 3 Lit 1.00 Kg 3000 Liters
K-6 250 Lit/hr. 5 Lit 1.50 Kg 6000 Liters
K-8 600 Lit/hr. 10 Lit 3.00 Kg 12000 Liters
K-10 1000 Lit/hr. 15 Lit 4.50 Kg 18000 Liters
K-12 1400 Lit/hr. 20 Lit 7.50 Kg 25000 Liters

We help industry-leading brands

Battery Manufacturing Check Mark
Battery Manufacturing
High Pressure Boiler Check Mark
High Pressure Boiler
Hospital Check Mark
Hospital
Laboratory Check Mark
Laboratory
Research Technology Check Mark
Research Technology
Distilleries Check Mark
Distilleries
Pharmaceuticals Check Mark
Pharmaceuticals
Cosmetics Check Mark
Cosmetics
Chemicals Check Mark
Chemicals
Electronics Check Mark
Electronics
Surface Cleaning Check Mark
Surface Cleaning

All Rights Reserved. © 2024 Raku Equipments and Design & Developed by arshinfosystems.com